Introduction
If you’re looking to update your bathroom on a budget, painting your shower surround can be a great option. Not only is it cost-effective, but it can also give your bathroom a fresh new look. In this guide, we’ll take you through the steps to paint your shower surround.
Step 1: Clean the Shower Surround
Before you start painting, it’s important to clean the shower surround thoroughly. Use a mixture of warm water and mild soap to remove any dirt and grime. If there is any mold or mildew, use a solution of bleach and water to clean it off. Rinse the surface with clean water and let it dry completely.
Step 2: Sand the Surface
Once the shower surround is dry, use a fine-grit sandpaper to lightly sand the surface. This will help the paint adhere better. Be sure to wipe away any dust with a damp cloth before moving on to the next step.
Step 3: Mask Off the Area
To protect any areas that you don’t want to paint, use painter’s tape to mask off the edges of the shower surround. Be sure to cover any fixtures, such as the showerhead and faucet, with plastic bags or tape.
Step 4: Apply Primer
Before you start painting, it’s important to apply a coat of primer. This will help the paint adhere better and provide a smooth finish. Use a brush or roller to apply the primer evenly over the entire surface. Let it dry according to the manufacturer’s instructions.
Step 5: Paint the Shower Surround
Once the primer is dry, it’s time to paint the shower surround. Choose a paint that is specifically designed for use in bathrooms and is moisture-resistant. Use a brush or roller to apply the paint evenly over the entire surface. Let it dry according to the manufacturer’s instructions and apply a second coat if necessary.
Step 6: Remove the Masking Tape
Once the paint is dry, carefully remove the masking tape. Be sure to do this slowly to avoid peeling off any of the paint.
Step 7: Reinstall Fixtures
Once the masking tape is removed, it’s time to reinstall any fixtures that you removed earlier. Be sure to follow the manufacturer’s instructions for reinstallation.
Step 8: Clean Up
After you’ve finished painting your shower surround, be sure to clean up any paint drips or spills. Use a damp cloth or paper towel to wipe away any excess paint.
Step 9: Let the Paint Cure
It’s important to let the paint cure for at least 24 hours before using the shower. This will ensure that the paint is fully dry and won’t be damaged by water.
Step 10: Enjoy Your Newly Painted Shower Surround
Once the paint is fully cured, you can enjoy your newly painted shower surround. Not only will it look great, but you’ll have saved money by not having to replace it.
Conclusion
Painting your shower surround can be a simple and cost-effective way to update your bathroom. By following these steps, you’ll be able to achieve a professional-looking finish that will last for years to come. Just remember to choose a bathroom-specific paint, use a primer, and let the paint cure fully before using the shower.
